DC MOTOR PUMP GROUP 1
Standard Description
Consisting of a hefty duty DC motor as well as CB1S gear pump, this pump motor group is definitely an best hydraulic electrical power unit for mobile hydraulic equipments, this kind of as automobile carriers, mobile aerial lifts, and backup techniques.
DC MOTOR PUMP GROUP two
Basic Description
This motor pump includes 4.5″ DC motor, a CBSR gear pump with built-in relief valve and verify valve.
DC MOTOR PUMP GROUP three
Standard Description
This motor pump consists of a four.5″ DC motor and a CBSR gear pump which has a typical energy up/gravity down circuit that has a relief valve, a examine valve as well as a solenoid release valve.
Particular Notes
one. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean all the hydraulic parts concerned before mounting the power unit.
three. Viscosity on the hydraulic oil shoud be 15~68 cst, which should also be clean and free of impurities. N46 hydraulic oil is suggested.
four. The power unit need to be mounted horizontally.
5. The relief valve strain is preset about 25% increased than the operating pressure.
six. Flow management valve for lowing velocity adjustment is obtainable unpon request.