Equipped together with the zero leak bidirectional checking sole-noid valves, this electrical power unit is created to the operation of two independent circuits. Which are respectively to the major and subordinate platforms on the double scissors lift. Two cut-off valves are utilized for lowering the machine manually in case of electrical power loss. If more independent circuits are necessary for the application please make contact with us for availability.
Remark: 1. Please talk to our sales engineer for the unique pump displacement, motor energy or tank capacity.
two. CSA or UL certified motors are available on request.
1. The AC motor is of S3 duty cycle, which might only perform intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
2. Clean every one of the hydraulic components concerned before set up of the power unit.
three. Viscosity from the oil shoud be 15~46 cst,as well as the oil should really be clean and free of charge of impurities,N46 hydraulic oil is advisable.
4. The electrical power unit really should be mounted vertically.
5. Check the oil degree in the tank just after the original running in the electrical power unit.
6. Oil transforming is required soon after the preliminary a hundred operation hours,afterwards after every 3000 hours.