Agricultural Gearbox
The agricultural gearbox is the main mechanical element of the kinematic chain of agricultural machines. It really is normally driven by the tractor power take-off via the PTO shaft and the gearbox drives. The working torque may also be transmitted to the gearbox by hydraulic motors or belt pulleys, furthermore to chain gears.
Agricultural gearboxes always have a single input shaft and at least one particular output shaft. If these shafts sit at 90° to one another, the gearbox is an ORTHOGONAL ANGLE gearbox or more frequently called a right-angle gearbox.

rotary tiller gearbox can be adopted middle equipment transmission program, mounted with the tractor of 12-80HP. Tractor wheel tracks are totally protected after tillage as the functioning width is a lot wider. The quality is dependable and the efficiency is well. So that it can be utilized on dried out and paddy field. It could reduce the time, laboring, and price, etc. during operation

Increasers and Reducers
When the gearboxes have the two gears with different numbers of teeth.
The gearbox is a reducer when the driving gear, i.electronic. the main one with the input shaft, has the fewer number of teeth (pinion), hence the result shaft rotates slower than the input shaft.
It is called an increaser when the insight shaft is mounted on the apparatus with the larger number of teeth (crown), therefore the output shaft rotates faster compared to the input shaft.
Right-angle gearboxes, distributors or rotational invert gearboxes
When the gearboxes have gears with the same number of the teeth.
The gearbox is called right-angle when it only has two shafts (input and output),
whereas it really is called a distributor whenever there are at least two output shafts.
It really is called a rotational invert gearbox and parallel offset in the versions with parallel shafts with two gearboxes.

Speed change
in addition to the primary couple of gears and relevant shafts, the gearboxes could also have additional gears with a different number of teeth. The apparatus shift of the primary pair of gears with the secondary ones allows different speeds. The manual change of the secondary equipment pair with gears with different number of teeth allows modifications to the result rotation speed.
CMR GROUP can design and manufacture also agricultural machinery applications.

Added information about gearbox for agricultural machinery could be located on our internet site.