However, in order to ensure that a nylon gear may be the right investment for your application we encourage you to seek out a trusted and experience nylon gear manufacturer and discuss the needs you have with them before making a purchase. Before production a nylon equipment, a manufacturer must consider a number of factors, perhaps the most important factor being the Nylon Gear Rack strain that the nylon equipment must be in a position to withstand. If the strain is an excessive amount of, a nylon equipment is far more probably to break when compared to a metal gear counterpart. Nylon gears have more advantages than just being cheaper compared to the sturdier steel gears, nylon gears also operate at a lower sound level. This makes them ideal for the applications we discussed earlier in an office setting. Often times these machines are produced from similar components which means that nylon gears certainly are a must as a steel gear would eventually grind away at the plastic-type tracks they need to operate on. Along with all of these, nylon gears also provide an advantage when it comes to maintenance as they absorb dirt and various other particles rather than grinding them down, as regular grinding could cause damage as time passes to a metal gear.

Rack and pinions are used for lifting mechanisms (vertical movement), horizontal motion, positioning mechanisms, stoppers and to let the synchronous rotation of several shafts generally industrial machinery. However, they are also found in steering systems to change the direction of cars. The characteristics of rack and pinion systems in steering are as follows: simple framework, high rigidity, small and lightweight, and superb responsiveness. With this system, the pinion, mounted to the steering shaft, can be meshed with a steering rack to transmit rotary motion laterally (converting it to linear motion) so that you can control the wheel. Furthermore, rack and pinions are used for various other purposes, such as playthings and lateral slide gates.
A nylon equipment is often a more cost effective gear than other types of gears, however they cannot be found in the same types of applications since metal gears are used. Nylon gears can often be found in applications such as inside of office gear such as for example copiers, printers, or children’s toys, and other similar low stress, low push applications. The reason that they are the more cost effective gear is that nylon gears are far more economical to produce a metal gear, which in turn results in a lesser cost for the client. In addition to the initial cost savings, nylon gears also have to lubricated far less than a metal gear might require, meaning further cost savings to the customer long term.

There are applications where in fact the gear rack is stationary, as the pinion traverses and others where in fact the pinion rotates upon a fixed axis as the gear rack moves. The former is used broadly in conveying systems while the latter can be used in extrusion systems and lifting/lowering applications.