General Description
This power unit characteristics a permanent magnet motor using a power up gravity down circuit. Activate the start off solenoid to start out the motor to lift the machine. The lowing movement is activated through the solenoid valve with the decreasing speed managed from the pressure compensated flow manage valve. Goods of this series might be broadly used in the market of logistic gadgets this kind of as fork lift, mini lift table, etc.
Distinctive Notes
1. This energy unit is of S3 duty cycle, i.e.,non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean every one of the hydraulic parts concerned just before installation of the power unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst, which ought to also be clean and no cost of impurities. N46 hydraulic oil is recommended.
4. This energy unit is built to be mounted vertically.
five. Check the oil level in the tank after the 1st star in the power unit.
six. Oil modifying is required just after the preliminary 100 operation hours,afterwards as soon as each and every 3000 hours.
7. More pump sizes and tank sizes are avaiable on request.