Hanging Pulleys designed for Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to aid with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as for example block and deal with systems. They require about half the push of a single-groove pulley to move the same load.
Pulleys with a bearing are simpler to convert than pulleys with out a bearing.
Acetal, nylon, and light weight aluminum are lightweight and corrosion resistant. Stainless is the most corrosion resistant.
Styles C, D, and J have got a bracket on underneath for tying off one end of a rope.
Style K decrease the force needed to keep your load in place. Unlike standard pulleys, these possess a V-groove for more grasp on your rope, plus they ratchet when under load so they don’t slip in the additional direction. Pulley for3/8″ dia. rope can be established to ratchet even though not under load.
Mounted Pulleys for Rope-For Horizontal Pulling
Install these pulleys to a set surface to aid with horizontal pulling or to guide a rope.
Pulleys with a bearing are simpler to convert than pulleys with out a bearing.
Aluminum and nylon are lightweight and corrosion resistant. Stainless gets the most corrosion resistance.
Pulleys for Rope-For Horizontal Pulling
Also called sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to switch than pulleys without a bearing.
Acetal and metric gear rack china aluminium are lightweight and corrosion resistant. Galvanized steel is certainly more corrosion resistant than iron and metal. Stainless steel is the most corrosion resistant.
Easy-Open Hanging Pulleys for Rope-For Horizontal Pulling
Also referred to as snatch blocks, these pulleys open so it’s easier to feed the rope through the housing-a totally free rope end is not needed. Use them to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Aluminum is more light-weight than stainless steel. Stainless is certainly more corrosion resistant than aluminium.
Pulleys for Wire Rope-For Horizontal Pulling
Also referred to as sheaves, use these pulleys to aid with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Acetal and nylon are light-weight and corrosion resistant. Stainless may be the most corrosion resistant.
Mounted Pulleys for Wire Rope-For Horizontal Pulling
Attach these pulleys to a flat surface to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about 50 % the pressure of a single-groove pulley to go the same load.
Pulleys with a bearing are simpler to change than pulleys without a bearing.
Stainless steel can be more corrosion resistant than steel.
Hanging Pulleys intended for Wire Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to aid with horizontal pulling or to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as block and tackle systems. They require about half the force of a single-groove pulley to move the same load. They have a bracket on underneath for tying off one end of your wire rope.
Pulleys with a bearing are easier to change than pulleys with out a bearing.
Nylon is lighter in weight than metal. Aluminum can be corrosion resistant. Stainless steel is the most corrosion resistant.
Pulley with carabiner can mount to metal framing or hang in your rigging system.
Easy-Open Hanging Pulleys for Wire Rope-For Horizontal Pulling
Also known as snatch blocks, these pulleys open therefore it’s simpler to feed the rope through the housing-a free rope end is not needed. Use them to aid with horizontal pulling or even to guide a rope.
Style D pulleys possess a corrosion-resistant stainless steel housing.
Pulleys for Wire Rope-For Lifting
Use the bore to mount these pulleys on a shaft. These pulleys are also known as sheaves.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Nylon pulleys are lighter in weight than steel pulleys.
Warning: Never make use of to lift people or items over people.
Mounted Pulleys for Wire Rope-For Lifting
Mount these pulleys to a flat surface.
Pulleys with two grooves are for use in applications where multiple pulleys move a single load, such as block and deal with systems.They can reduce the force had a need to move the strain by up to two times compared to single-groove pulleys.
Pulleys with a bearing are simpler to change than pulleys without a bearing.
Stainless steel pulleys are more corrosion resistant that steel.
Style 3 pivots up to 200° for different pull directions.
Warning: Never make use of to lift people or items over people.
Hanging Pulleys intended for Wire Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as for example block and deal with systems. They require about 50 % the push of a single-groove pulley to go the same load.
Pulleys with a bearing are simpler to convert than pulleys without a bearing.
Style Electronic pulleys have bracket on the bottom that lets you tie off one end of your wire rope.
Warning: Never make use of to lift people or items over people.
Easy-Open up Hanging Pulleys for Wire Rope-For Lifting
Also called snatch blocks, these pulleys open therefore it’seasier to feed the rope through the housing-a totally free rope end isn’t needed.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and deal with systems. They require about 50 % the force of a single-groove pulley to move the same load.
Latch kits (sold separately) add a latch to the swiveling hook on Design C to maintain rope secure.
Warning: Never make use of to lift people or products over people
Hanging Pulleys for Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are used in applications where multiple pulleys move a single load, such as for example block and deal with systems. They are able to reduce the force had a need to move the strain by up to two times compared to single-groove pulleys.
Pulleys with a bearing are easier to convert than pulleys without a bearing.
Style A pulleys have a bracket on the bottom for tying off 1 end of a rope.
Warning: Never make use of to lift people or items over people.
Easy-Open up Hanging Pulleys for Rope-For Lifting
Also called snatch blocks, these pulleys open so it’s simpler to feed the rope through the housing-a totally free rope end is not needed.
Warning: Never make use of to lift people or products over people.