Worm drive gearbox with motor
worm motor
A robust worm-travel gearbox powered by an MM28 electric motor. Ideal applications where a simple to match, high torque output is required. Great for student based projects including robots and buggies.
The machine has been designed so that the output shaft could be ‘clicked’ in and out for modification. E.g. reducing to size. The electric motor is snap fitted into its cradle to activate the gear and worm.
Details
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + motor: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the engine is not turning. The high equipment ratios of 216:1 or 336:1 get this to gearbox appropriate for small walking robots, lifting mechanisms, and various other applications where huge torque is desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draft to a few amps, making them perfect candidates for the DRV8833 motor driver carrier. Engine overheating can be due to excessive stalling, also at suprisingly low voltages. We advise that you use stall-detection sensors, or just see your robot, to make sure that it doesn’t stall for more than a few seconds at a time.
This gearbox includes a 4 mm diameter, round output shaft, which works together with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also fits on the smaller threaded end of the shaft, although it is not specifically designed to work with this kind of shaft (the hub’s set screw could damage the thread on the shaft).
Ever-Power gear motors will be economical, right-angle, worm-geared motors that install easily found in the tightest applications. Economical right position worm geared motors arranged new criteria for reliability, effectiveness and economy with unparalleled features which includes hollow shafts in the smallest sizes. An inverter friendly design offers easy integration now and a really future proof answer. The Ever-Power gear engine offers total flexibility in mounting choices includes shaft, base, encounter, and flange alternatives. The motor terminal box could be mounted in alternative positions rotated in 90º steps around the electric motor frame providing for unparalleled integration possibilities.
Ever-Power gear motors comply with North American and International specifications, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a true total solution for our global customers.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dirt tight and hose proof,and can be used outside or in wet and dusty environments without the use of additional enclosures. Complete rated output is available at the result shaft of the machine.
Product Features
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change initial after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Connect connectors.
With included inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the alternative for applications requiring a good part turn, optional dual output, or perhaps an inability for the engine to be back driven. The DC correct angle equipment motors are designed for constant and intermittent duty procedure. Our right angle gear reducers are designed with many mounting plate choices, making them well suited for a number of DC motor based applications. We offer 12 ratios which range from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Standard brush life of 2000+ time (varies by application)
EP Products Worm Gear Motors are made to generate high torque in a little package size. Worm Gear Motors are excellent for applications that want a personal- locking or breaking feature since the output shaft can’t rotate when there’s no power used. Additionally, Worm Gearheads can transfer motion in 90 degrees. With various decrease ratios, precision minimize gears, voltages and sizes, EP Items includes a DC Worm Gear Motor solution for your application.
Features and Benefits
Very High Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Gear Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Protection Door Locks / Industrial Conveying Systems / Security Gates / Oral Chairs / Ambulance Cots & Stretchers Many of our DC Motors could be complimented with among our Worm Gearheads. EP Items will work with you to design and manufacture a Worm Gear Motor that will optimize the functionality of your unique application.
Built to your unique requirements
Engine Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Cut / Round / Splined / Other)
General Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Additional Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm motor uses a metal gear box for durability and a higher torque output. Due to the special mechanical framework of the worm travel the motor output shaft is self locking and may not be rotated.
This part uses a two wire connection and supports direction control as well as PWM speed control. Rated voltage is 12v and can achieve 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear systems from EP DRIVESYSTEMS especially display their strength in applications where great gear ratios are essential. Our worm geared motors are for that reason optimally suited for use in intralogistics, packaging technology and the meals & beverage industry.
Four great known reasons for EP worm geared motors:
Rugged
Our worm geared motors have a high overload capacity
Maintenance Friendly
Washdown versions enable simple and efficient cleaning of the drive system.
Corrosion protection
The NSD tupH sealed surface conversion is exceptionally chemical, corrosion and abrasion resistant.
Flexibility
Our modular style give users maximum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are many applications that want drive systems, and each one of these has its own unique requirements. The EP series worm gear motors could be quickly and effectively adapted to satisfy your needs.
Worm gear units impress with their high power density and small style. If required, we can also source them with the highly effective nsd tupH surface area treatment.
As well as the basic EP housing, we offer an extensive line of bolt-on parts to customize the merchandise including torque arms, shaft covers and output flanges. These can be easily field installed, but we may also be glad to assemble the individual components for you.
Find out more about our modular SI worm geared motors!
Find out more
Smooth and Tidy: The EP worm gear unit SMI
SMI worm gear systems feature a smooth, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface area conversion makes this product ideally suited for severe and demanding industries like food processing and pharmaceuticals.
Adaptable input designs such as for example NEMA, IEC or direct motor mounts in extra foot or flange mounted housing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared engine program. The units have got on all sides numerous repairing possibilities and enable an easy assembling for the customer.
Other drive configurationscan be designed by use of built-in accessories (e.g. torque arm and result flanges). The housings are made in light weight structure out of aluminium die cast. Electric motor attachment is realised in general by way of IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:output shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm
Buy Worm Drive Gearbox with Engine – incorporating the next features: 1 to 6V voltage rating, 17100 rpm simply no load quickness, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm large, 40mm high, a good robust worm get gearbox powered by an MM28 engine (included), most ideal for applications where an easy to fit, high torque output is necessary, nylon housing and equipment, requires light oil or perhaps silicon grease lubrication, well suited for student based tasks including robots and buggies.
Most suitable for applications where an easy to match, high torque output is required
Ideal for student based projects including robots and buggies
Reversible Great torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Reversible Huge torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Features:
The motor is Gear DC engine with micro-turbine worm, you can change the wiring-connection to change motor rotation.
Turbo worm geared engine with self-lock, that’s, in the case of motor without electrical, the outcome axis is fixed, self-lock.
The reducer output shaft arranged vertically with the electric motor shaft, whole engine output shaft relatively-short than general gear electric motor, widely used to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the screen, door, Mini winch. Ect.
In sumo robot or combat robot competition where high holding torque’s motor is essential in order to avoid your robot being pushed by your opponent robot. The worm gear is definitely an improved option compared to the spur gear motor. How come worm gear so special? Take a look wiki out: Worm Get.
“Unlike with ordinary equipment trains, the direction of transmission (insight shaft vs output shaft) isn’t reversible when using large reduction ratios, due to the greater friction involved between the worm and worm-wheel, when usually an individual start (a single spiral) worm is used. This is often a advantage when it is desired to remove any probability of the output driving the input.”
In other words, it is tough to push your load (example, your robot) if the motor is not power or rotate.
Features and Spec:
Metal gear box
Output shaft is self-locking because of the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g