Introduction of Motor Grader (PY165C)
Motor Grader(PY165C)are mainly used in the operation of road surface leveling, ditch digging, slope leveling, bulldozing, scarification and snow removing on the road, airport and farmland. The motor grader is the necessary construction machinery for defense construction, mine construction, urban and rural road construction and irrigation works and farmland improvement.
Performance and Characteristics of Motor Grader(PY165C):
The adopted articulated frame assists the front wheel to steer, featuring small turning radius and flexablity
Electro hydraulic controlled brake power shift gearbox includes 6 Forward gears, and 3 Reverse gears.
The adopted international matched hydraulic parts ensure the reliable operation.
The blade movement is hydraulic controlled fully.
The rear axle is three-way drive axle with NO-SPIN self -locking differential.
The reasonable distribution of the adjustable operation panel, seat, lever and instrument guarantees the comfortable and convenient operation.
The luxury and beautiful cab features wide visibility and good sealing.
The machine can be equipped with front bulldozing plate, rear scarifier, front harrow and auto-leveling system
Techncial Parameters
| Basic specification | |
| Engine model | 6BTA5.nine |
| Rated power/pace | 125kW/2200rpm |
| Dimension(LxWxH) | 8970×2625×3470mm |
| Operating weight(CZPT) | 16500kg |
| Performance specification | |
| Travelling speed ,CZPT | 5,8,11,19,23,38 km/h |
| Travelling speed ,reverse | 5,eleven,23 km/h |
| Tractive force(f=.seventy five) | 82KN |
| Max. gradeability | twenty% |
| Tire inflation pressure | 260 kPa |
| Working hydraulic pressure | 16 MPa |
| Transmission pressure | 1.3~one.8MPa |
| Operating specification | |
| Max. steering angle of front wheels | ±50° |
| Max. lean angle of front wheels | ±17° |
| Max. oscillation angle of front axle | ±15° |
| Max. oscillation angle of balance box | fifteen |
| Frame articulation angle | ±27° |
| Min. turning radius using articulation | 7.3m |
| Biade | |
| Maximum lift above ground | 450mm |
| Maximum depth of cutting | 500mm |
| Maximum blade position angle | 90° |
| Blade cutting angle | 28°-70° |
| Circle reversing rotation | 360° |
| Moldboard width X height | 4270×610mm |
Our Solution
Crucial Parts of the Grader
Pushed into container
Our Certificaiton
