The EP Greenhouse reducer is a compact and lightweight reduction gear motor with a built-in limit switch system that’s suitable for assembly of a locally available electric electric motor. The geared motor can be used in manually-controlled or climate-managed ventilation and screen systems in greenhouses. The quick and easy-to-install EP gear reducer can be rainproof and windproof. The gear reducer includes a high protection course (IP65) and can be used within an ambient temperature of 0-60 °C.

The low-noise gear driver for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminum precision housing. The self-braking worm wheel transmission means that the drive shaft is certainly locked when the reduction geared motor is not running. The completely sealed reduction gear reducer has an expansion chamber with a diaphragm to keep carefully the gear essential oil at a low pressure under all conditions, even at high temperatures. Thanks to the use of an growth chamber, the reducer could be installed in any placement. There are no limitations, since there is no dependence on a bleed plug. The sealed reduction gear reducer keeps the apparatus essential oil of the reducer in optimum condition because of its entire operating lifetime. The reducer is suitable for discontinuous use, operating course s3-30%, with a maximum activation period of 25 minutes.

The Gear box reduction geared motor comes with an FT85 motor assembly flange, to which the right IEC standard motor can easily be installed (EN 50347).

The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit change system is installed within an integrated chamber and is usually enclosed by an impact-resistant plastic-type cover. The limit switch system is accessible and easy to adjust. The limit change system’s optimum switching range is 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The reducer comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The geared motor for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.

Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of software of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temps of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, optimum activation time 25 moments.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC standard motor (EN 50347).
Maximum switching selection of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).