one.A connecting link of an O-ring Chain for basic application is pre-coated with grease on the pins. Before connection, confirm the grease about the surfaces of pins, and should the level of grease is tiny, apply grease with bare hands. (If gloves are made use of, the grease will probably be absorbed by the gloves.)
Illustration: When the connecting website link (I) of an O-ring chain for basic application is
shipped, O-rings are fitted on the roots of the pins. In case the O-rings come loose as a consequence of vibration through transport, refit the O-rings in to the roots of the pins.
In this case, you should definitely return the grease collected in the roots from the pins to the central surfaces in the pins, additional at portion A than at portions B proven inside the above illustration. (Portions A is worn due to sliding together with the bushings.)
two.The chain may be most effortlessly linked around the teeth of a sprocket. Engage the backlinks at each ends of your chain with the sprocket teeth and fit connecting pins. If the sprocket may be moved, the chain may also be linked over the loosened side.
3. Connecting method
one.Confirm that O-rings are attached to the roots of the pins.
2.If your level of grease applied over the connecting pins is small, coat the pins with grease in the central portions.
three.Insert the connecting pins into the bushings from the inner hyperlinks at the two ends.
4.Verify the grease is applied towards the complete face on the O-ring, and fit the O-ring onto the connecting pins.
five.Insert the connecting pins to the connecting plate and although pressing the connecting plate, set up the spring clip. Confirm whether the head (the end without a split) on the spring clip is turned within the feeding path on the chain. (See the following illustration.)
six.You should definitely confirm that the spring clip is securely fitted inside the clip grooves on the connecting pins.
This completes jointing of the connecting website link. Note that grease about the surfaces of connecting pins and O-rings might be removed in the course of set up do the job. In this instance, re-grease utilizing the grease around the surface from the base chain or the grease within the polyethylene bag through which the connecting link was contained.