Ever-Power Company , announces its right position NEMA gearbox designed to IP65 specifications for use in clean straight down applications in packaging gear and comparable machinery. Rated backlash is 30 arc-minutes with options for 4 or 8 arc-minutes. The NEMA 34 flanged gearbox has 440C Stainless steel bearings with seals and Nitrile o-rings shaft seals on both insight and result. All fasteners are stainless. Hard anodized aluminium or 316 Stainless housings can be found. Customizing for apart from NEMA motors or your specific application is very easily done.
This Nema 17 stepper motor with 39mm body and 1.68A rated current, integrated with a 41mm Planetary gearbox of 5:1 gear ratio. It’s a good solution to applications that with special space but need low rate and/or high torque.
Manufacturer Part Quantity: 17HS15-1684S-HG5
Motor Type: Bipolar Stepper
Step Angle: 0.36 deg
Holding Torque without Gearbox: 39Ncm(55oz.in)
Rated Current/phase: 1.68A
Phase Resistance: 1.6ohms
Inductance: 3.2mH ± 20%(1KHz)
Gearbox Type: Planetary
Gear Ratio: 5 : 1
Backlash at No-load: <=15 arcmin
Max. Permissible Torque: 3.5Nm(495.6oz.in)
Moment Permissible Torque: 6Nm(849.7oz.in)
Max. Radial Load: 150N
Ambient Temperature: -10 – 90℃
Insulation Class: B
Noise: <=50 dB
Life: 20000 h
Frame Size: 42 x 42mm
Motor Length: 39mm
Gearbox Length: 41mm
Shaft Diameter: Φ8mm
Shaft Length: 23.5mm
Key-way Length: 14mm
Number of Leads: 4
Lead Length: 320mm
Replaced by the 3325_0, a motor with the same NEMA size and same torque.
This NEMA-17 motor has an integrated Planetary gearbox with a 52/11 :1 ratio. It generates 16.2 Kg-cm of torque at 1.68 Amps.
When linked to a 1067 – EP, the 3317 has a maximum acceleration of just a little over 900 RPM. At the output of the gearbox, the step angle is a little under 0.35°. With all the step position in calculations, you should derive the specific step position by dividing 1.8° by the gearbox decrease ratio.
This specific revision of the 3317 is made by a different producer, but should behave very similarly to the revision 0 version.
Brother Gearmotors NEMA C-Face Speed Reducers
The gears in these NEMA C-Face speed reducers are high strength, maintenance free and may be mounted in virtually any path with their slip fit “O” ring style. Low to high decrease ratios, flange mount or foot attach types, right angle or hollow shaft correct angle types available. Match NEMA C-Encounter AC motors, brushless DC motors and brushed DC motors.
For 1/2 HP up to 3 HP Motors
NEMA C-Face, 140TC and 180TC input flanges
Inline Helical Gear Acceleration Reducers
Right-Angle Hypoid Gear Speed Reducers
Downloads & Reference
NEMA C-Face Swiftness Reducers Lineup
Maximum Input Speed
NEMA 56C Speed Reducers
NEMA C-Face Speed Reducers
Parallel Shaft (Foot Install)
5:1 ~ 200:1 3600 r/min
Parallel Shaft (Flange Mount)
Right-Angle Hollow Shaft
5:1 ~ 240:1
Right-Angle Solid Shaft
5:1 ~ 240:1
*Torque and Acceleration vary based on insight voltage and frequency, please review item specifications for details.
Compared to a spur equipment of approximately the same pitch diameter, Helical gears may transfer high loads at greater speeds. That is because of the gradual engagement of one’s teeth and smooth transfer of the strain.
Lightweight and Compact
Die cast aluminum equipment housings make these swiftness reducers light in weight, allowing engineers to design more economical mounting provisions
High-quality synthetic grease is utilized in every gearboxes. They are packed at the factory and do not require maintenance filling or level checks. This saves valuable time at setup and eliminates concern for pricey oil disposal needed by the EPA.
Mount in Any Direction
These gearboxes are sealed with machine “slip” fit “O” rings and dual lip springtime shaft seals on both the motor and insight shaft and output shaft driver. Therefore, the gear motors could be mounted in any conceivable path without concern for the position of a breather plug.
NEMA Output Flange Planetary Gearboxes, Max. Ratio 1000:1
Frame Size:42.6/60/90/115/145 mm
Nominal Output Torque:8~215 N.m
Nominal Input Speed:2500~4000 rpm
Max. Input Speed:5000~6000 rpm
Backlash:12~15 arcmin, three stages, 6~9 arcmin, single stage, 8~12 arcmin, two stages
Noise Level:60~67 dBA/1m
The Ever-Power EP Series gearboxes are equipped with a NEMA output flange with metric shaft, to offer exceptional torque ratings and convenience of many of present servo and stepper movement control applications. The gearboxes are drop-ins for most industry standards and obtainable from one to three phases with ratios 3:1 up to 1000:1, the very best backlash of < 6 arc-minutes. Adapters for all servo and stepper motors.
5 frame sizes with NEMA 17, 23, 34, 42, 56 flange and metric shaft
Backlash as low as 6 arc-minutes
Ratios up to 1000:1
High radial and axial loading capacity
20,000 hours service life
Synthetic grease, maintenance free
Reliable operating performance, cost effective integration