The high-end economy lines GSN & GFE combine high performance with economic efficiency: both lines are also built with helical ground gears, ensuring a minimum noise level and smooth running. The full needle bearing provides been especially designed to reach high torques that beat the competition for systems of the same size. All planetary carriers are produced as a cage created from solid material. This increases quiet operating characteristics while at the same time improving positioning precision and reducing backlash. Yet another shaft sealing band ensures maximum dirt and splash water safety relative to protection class IP65 in all lines.
One method to reduce backlash is by using precision gears. The focus on manufacturing in precision gears is definitely tighter tolerances, therefore all around the gear is a tighter, more exact suit. And the tighter suit means less play in the gear teeth, which may be the trigger of backlash to start with. Of training course, precision gears are more expensive, if the application calls for high accuracy, then precision gearing could be the way to go.
From a equipment design perspective, an easy way to reduce backlash is to make sure the teeth mesh tightly together. This is typically carried out by shortening the center distance between gears. For pre-loading, this can be done utilizing a spring mechanism to carry the gears firmly set up. This also eliminates the play between the gear teeth and thus eliminates backlash.
Of course, the type of gears used may also have a huge impact on the quantity of backlash. So for instance, some gear types such as strain wave gears, or harmonic equipment drives, have zero backlash.

The GSD, GSB & GSBL high-end gearbox lines are constructed in a space-optimized, two-stage design. Because of the lower torque values, the insight stage can be dimensionally smaller compared to the result stage. Its short design makes the GSD collection the perfect high-end gearbox for space limited applications. The low regular backlash of the GSD line makes it the perfect fit for highly powerful applications where highest positioning and swiftness accuracy is required. The flange output creates highest torsional rigidity. For the lodging of especially high axial loads, taper roller bearings are elective in sizes with 90 mm diameter or higher. The GSB line means high performance in mixture with low backlash and high precision. Its robust, one-piece housing permits a higher gearbox rigidity and the absorption of high radial and axial loads. The angular gearboxes of the GSBL line offer the same advantages as the GSB collection; the right angle form makes the GSBL line the perfect match for all dynamic applications where space is bound.

Worm Drive Servo is used to fit in any kind of day-to-day routine.