One reduction worm gearing offers high ratio reduction with few moving parts in a close-coupled compact drive. The proper angle set up of driving-to-driven machine requires a minimum of space. Input and output shafts can be prolonged in either or both directions in horizontal or vertical plans adaptable to any mounting requirement. Efficient motor speeds are decreased to slow speed requirements of many industrial machines in a single reduction.
Product Features
Ratios 5:1 to 70:1
Hollow & Solid Output Shafts
Vertical & Horizontal Mounting
Fan Cooled (Standard)
Motor Mounts (C-Face Adapters or Scoops)
Cast Iron or Metal Housings
Products
The exclusive usage of the involute Helicoid Thread form (with departing side contact) on the worm and gear offers high efficiencies, and lengthy service existence. The hardened surface and polished alloy metal worm develops a easy, work hardened surface area on the bronze equipment. For this reason worm gears use in and improve with extented service while various other gears are wearing out. Ever-Power offers a broad selection of model configurations, sizes, ratios, and accessories from our standard products.
Fabricated Designs
If the application involves severe shock loads or feasible housing damage from external sources (as in steel mills or mobile devices applications) Ever-Power can provide fabricated steel housings with up to a 48″ center distances. Fabricated housings provide optimum rigidity and strength that allows the transmitting of higher horsepower amounts than are possible with standard cast iron products. Extra heavy side plates connect the worm and equipment shaft bearing supports, assuring appropriate meshing of the apparatus under all load conditions. In smaller sized sizes, fabricated metal reducers are interchangeable with Ever-Power regular cast iron reducers.
Custom Designs
Ever-Power can provide custom speed and reversed engineered reducers for the application, be it a new project or a direct drop-in alternative to a competitor’s rate reducer. Fabricated metal reducers enable Ever-Power to match a competitor’s footprint, centerline, and shaft height allowing a direct drop-in alternative saving the customer time and money.
Long – Quiet Life
All worm gears in Ever-Power reducers are produced from phosphorous bronze. Our design also includes a hardened, ground and polished alloy steel worm. This mixture develops a even, work-hardened mating surface area of the bronze gear which improves with prolonged service.
Worm gearing is a class of gear reducers that utilizes right angle, nonintersecting shafts. This form of reducer provides simple and quiet procedure and permits the possibility of large swiftness reductions. These gears are available from stock in a wide variety of ratios, from as low as 4:1 up to 3600:1. The compact design and structure allows worm gear reducers to be placed in a relatively small space. Thus, very high reductions in a limited package size can be achieved with this configuration. Our worm gear features the constant sliding tooth action between worm and the teeth. This escalates the tolerance for large loads and shock loads. Worm gear drives offer users high reducing convenience of relatively low cost in comparison with some other types of gearing.
The usage of worm gearing extends across many industries including food, beverage and grain and has many applications. Some applications that utilize worm gearing are: conveyors, mixers and bucket elevators.
Ever-Power worm equipment reducer gearbox series bottom on years of experiences uses designed teeth surface with unsurpassed torque transfer performance with great performance, efficency and cost.Worm gear system transmits power through sliding get in touch with, resulting in extremely low vibration , sound, small backlash and self-locking property
-Housing:Onetime we casting creats great rigidity for serious impacts. Outer cooling fins and internal lubrication oil diversion channel style to improve heat dissipation.
-Worm Shaft: Manufactured with Carbon alloyed Metal S45C or SCM415, precison machined and carburized to HRC45 or HRC60, then for precision tooth grinding to ensure maximum contacting.
-Worm Wheel: Manufactured with Carbon alloy ALBC2, teeth are machined by precision CNC hobbing machine to sustain high impact.
A worm equipment reducer is one kind of reduction gear box which includes a worm pinion input, an output worm equipment, and includes a right angle output orientation. This type of reduction gear package is generally used to have a rated motor velocity and produce a low speed output with higher torque worth based on the reduction ratio. They often can solve space-saving problems because the worm equipment reducer is one of the sleekest decrease gearboxes available due to the small diameter of its result gear.
worm gear reducerWorm gear reducers are also a popular type of swiftness reducer because they offer the greatest speed reduction in the tiniest package. With a higher ratio of speed reduction and high torque result multiplier, it’s unsurprising that many power transmission systems make use of a worm equipment reducer. Some of the most common applications for worm gears are available in tuning instruments, medical tests equipment, elevators, security gates, and conveyor belts.
SW-1 and SW-5
Torque Transmission offers two sizes of worm gear reducer, the SW-1 and the SW-5 and both are available in a variety of ratios. The SW-1 ratios include 3.5:1 to 60:1 and the SW-5 ratios include 5:1 to 100:1. Both of these options are produced with durable compression-molded glass-fill up polyester housings for a long lasting, long lasting, light weight speed reducer that’s also compact, non-corrosive, and nonmetallic.
Features
Our worm equipment reducers offer a choice of a solid or hollow output shaft and show an adjustable mounting position. Both SW-1 and the SW-5, nevertheless, can withstand shock loading better than other decrease gearbox styles, making them perfect for demanding applications.
Rugged compression-molded glass-fill up polyester housing
Light weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Gear Reducers also known as worm gearbox or worm acceleration reducers. Worm equipment reducers are utilized for speed decrease and raising the torque for electric engine drives. You can decide to mount your NEMA engine to the reducer by using the NEMA C encounter flange or make use of a coupling. If you want a coupling for the result or input shaft see our coupling section for selecting a coupling. We offer four assemblies left hand and right hands and double result shaft and shaft input and shaft result. Interchangeable with many worm gear manufactures. See data sheet in item overview for diamensions. Unless you see your type, make sure you Contact Us.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Models for 56C and 145TC Motors
Ever-Power DDVM series triple-reduction worm gear swiftness reducers are available in ratios from 5000:1 to 175,000:1 and middle distances from 7” to 20” (larger sizes available on request). Result torque ranges from 33,000 in lbs. for the 7” CD DDVM-70 to 582,900 in pounds for the DDVM-200. Mechanical HP insight requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers can be found in four configurations: horizontal, vertical, shafted, and shaft mounted.
These reducers are well suited for water/waste-water gear drive applications such as for example thickeners and clarifiers, which require a vertical down shaft. Other available configurations also make Ever-Power triple reduction reducers perfect for make use of on mixers, elevators, solar power panels, astronomical telescopes, indexing tables, hoists, conveyors, or other process or materials handling systems where large torques/gradual speeds are needed.
These reducers are also offered with a helical primary reduction stage and are termed the HDVM series
Product Features
Ratios 5000:1 to 175,000:1
HP from 0.09 to 6.25.
Output Torque to 583,000 in lbs.
Output RPM only 0.01 with a 1750 RPM input.
Ideal for ultra-slow speed, high torque applications
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Applied to Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Versions for 56C and 145TC Motors
Description
The HDR Series worm equipment reducers are found in low to moderate horsepower applications to lessen speeds and increase torque. Worm gear reducers can be found in direct or indirect drive, direct drive versions are 56C or 145TC flange install with either right, left or dual result shafts or a hollow bore result. The indirect drive models are shaft input-shaft result boxes for make use of with sprocket or pulley drive systems. They offer an effective low cost solution to speed decrease and increased torque, with higher tolerances for shock loading than helical gear reducers.
In order to decide on a gearbox speed reducer, you will have to determine the required torque and provider factor for the application form. Click on “Specs” above for a table that will aid in identifying the service aspect. For service elements above 1.0, multiply the required torque by the services factor.
Our regular 700 Series – the heart of Ever-Power speed reducer products – has been serving industry reliably for over 40 years. Its proven modular style has set the sector standard for performance and may be the most imitated item in the current worm gear speed reducer market. But why accept a knock-off when you can have the original – from Ever-Power.
Specifications
11 basic solitary reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating existence.
Its multi-position mounting versatility allows for installation in practically any position.
Housings are straddle-milled, top and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for optimum durability, in addition to greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures capacity for high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal lifestyle.
Both 2D and 3D CAD drawings can be found in our eCatalog.
TheIncreased Quality! Industrial Ranked! Inexpensive!One-piece gearcase, without exterior ribs, is made of close-grained cast iron and for rigid gear and bearing support. It also offers excellent heat dissipation.Double lip, spring-loaded seals protect from oil leakage and prevent dirt from entering.Stepped shafts with oversized ball andtapered roller bearings.Carbon metal shafts for greater strength.High tensile strength cast bronze worm wheel and hardened and ground alloy steel worm made intregal with the shaft for long and trouble-free life.Oil sight gauge for ease of maintenance (not available on sizes 25 and 34).Factory oil stuffed.Every unit test run prior to shipment.Universal installation with bolt-on foot.Highly modifiable design.All this at substantially decrease prices than you have already been accustomed to paying for reducers of lesser quality. Less