Worm drive gearbox with motor
A robust worm-drive gearbox powered by an MM28 motor. Ideal worm motor applications where a simple to fit, high torque output is required. Ideal for student based projects which includes robots and buggies.
The machine has been designed to ensure that the output shaft could be ‘clicked’ in and out for modification. Electronic.g. cutting down to size. The electric motor is snap fitted into its cradle to engage the gear and worm.
1 – 6V DC
0.1A to 1A depending on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + electric motor: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the motor is not turning. The high equipment ratios of 216:1 or 336:1 make this gearbox appropriate for small walking robots, lifting mechanisms, and various other applications where high torque is desired.
The low-voltage motors in the worm gearbox run on 1.5-4.5 volts and draw up to a few amps, making them ideal applicants for the DRV8833 motor driver carrier. Electric motor overheating can be due to excessive stalling, even at suprisingly low voltages. We advise that you utilize stall-detection sensors, or just view your robot, to ensure that it doesn’t stall for lots of seconds at the same time.
This gearbox includes a 4 mm diameter, round output shaft, which works together with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also suits on the smaller threaded end of the shaft, though it is not particularly intended to work with this kind of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right position worm geared motors set new criteria for reliability, effectiveness and economy with unparalleled features including hollow shafts in the smallest sizes. An inverter friendly style offers easy integration at this point and a really future proof option. The Ever-Power gear motor offers total versatility in mounting choices includes shaft, base, encounter, and flange solutions. The motor terminal box can be mounted in alternate positions rotated in 90º steps around the motor frame providing for unparalleled integration possibilities.
Ever-Power gear motors comply with North American and International criteria, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a true total answer for our global customers.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dirt tight and hose proof,and can be used outdoors or in wet and dusty environments without the utilization of additional enclosures. Complete rated output is available at the output shaft of the unit.
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Connecting with Connect connectors.
With integrated inverter up to 7,5kW.
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the answer for applications requiring a corner turn, optional dual output, or an inability for the engine to be back again driven. The DC correct angle gear motors are designed for continuous and intermittent duty procedure. Our right angle gear reducers are designed with a number of mounting plate options, making them ideal for a variety of DC electric motor based applications. You can expect 12 ratios ranging from 5:1 to 100:1.
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Standard brush life of 2000+ hours (varies by application)
EP Products Worm Equipment Motors are designed to generate high torque in a little package size. Worm Gear Motors are excellent for applications that require a personal- locking or breaking feature since the output shaft can’t rotate when there’s no power applied. Additionally, Worm Gearheads can transfer movement in 90 degrees. With various reduction ratios, precision cut gears, voltages and sizes, EP Items has a DC Worm Equipment Motor solution for the application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Gear Reduction Ratios
Security Door Locks / Industrial Conveying Systems / Security Gates / Oral Seats / Ambulance Cots & Stretchers Quite a few DC Motors can be complimented with one of our Worm Gearheads. EP Items will continue to work with you to design and manufacture a Worm Gear Electric motor which will optimize the functionality of your specific application.
Built to your specific requirements
Motor Type: Brushed / Brushless / Coreless
Shaft Material & Size
Shaft Configuration: (D Cut / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Additional Assembly Requirements (lead wires, connectors, etc.)
The turbo metal gear worm motor uses a metal gear box for sturdiness and a higher torque output. Due to the special mechanical structure of the worm drive the engine output shaft is usually self locking and may not be rotated.
This part uses a two wire connection and supports direction control along with PWM speed control. Rated voltage is 12v and can obtain 40RPM, with a torque of 8kg/cm.
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear models from EP DRIVESYSTEMS especially display their strength in applications where high gear ratios are essential. Our worm geared motors are as a result optimally suited for use in intralogistics, packaging technology and the food & beverage industry.
Four great reasons for EP worm geared motors:
Our worm geared motors have a high overload capacity
Washdown versions allow simple and effective cleaning of the drive system.
The NSD tupH sealed surface area conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Our modular style give users maximum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are many applications that require drive systems, and each of these has its own unique requirements. The EP series worm equipment motors could be quickly and effectively adapted to fulfill your needs.
Worm gear systems impress with their high power density and small style. If required, we can also supply them with the highly effective nsd tupH surface treatment.
As well as the basic EP casing, we offer an extensive type of bolt-on components to customize the merchandise including torque arms, shaft covers and output flanges. These can be very easily field set up, but we will also be glad to assemble the individual components for you.
Discover more about the modular SI worm geared motors!
Find out more
Soft and Clean: The EP worm equipment unit SMI
SMI worm gear products feature a clean, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface conversion makes the product ideally suited for severe and demanding industries like meals processing and pharmaceuticals.
Versatile input designs such as for example NEMA, IEC or immediate motor mounts in extra foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared electric motor program. The units have got on all sides different repairing possibilities and enable a simple assembling for the client.
Additional drive configurationscan be created by use of built-on accessories (e.g. torque arm and result flanges). The housings are created in light weight building out of aluminium die cast. Motor attachment is realised generally by means of IEC adapter B5 or B14A.
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:output shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm
Purchase Worm Drive Gearbox with Engine – incorporating the following features: 1 to 6V voltage ranking, 17100 rpm simply no load acceleration, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm wide, 40mm high, a robust worm drive gearbox powered by an MM28 engine (included), most ideal for applications where a simple to fit, high torque result is required, nylon housing and gear, requires light oil or silicon grease lubrication, perfect for student based projects including robots and buggies.
Most ideal for applications where an easy to fit, high torque output is required
Perfect for student based projects including robots and buggies
Reversible High torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Reversible High torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
The electric motor is Gear DC motor with micro-turbine worm, you can change the wiring-connection to change motor rotation.
Turbo worm geared motor with self-lock, that’s, regarding motor without electrical, the output axis is certainly fixed, self-lock.
The reducer output shaft arranged vertically with the motor shaft, whole electric motor output shaft relatively-short than general gear engine, trusted to be installed the dimensions requirements strictly occasion.
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Application: open the windowpane, door, Mini winch. Ect.
In sumo robot or combat robot competition where high holding torque’s engine is essential in order to avoid your robot being pushed by your opponent robot. The worm equipment is certainly a better option when compared to spur gear motor. Why is worm gear so unique? Check this wiki out: Worm Drive.
“Unlike with ordinary gear trains, the path of transmission (insight shaft vs output shaft) isn’t reversible when working with large reduction ratios, due to the higher friction involved between your worm and worm-wheel, when usually a single start (a single spiral) worm is used. This can be an advantage when it is desired to get rid of any likelihood of the result driving the input.”
In other phrases, it is challenging to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Output shaft is self-locking because of the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Worm drive gearbox with motor